Productie van op maat gemaakte uitrusting
Custom Gears Built Around Your Drawing
Drawing-based metal and engineering-plastic gears for prototypes, low-volume orders and repeat production. Send the tooth data, material, operating conditions and inspection requirements for an engineering review and transparent quote.
Heat treatment, surface finishing and inspection are coordinated through one production route.
Upload Your Gear Drawing →Gear Structures
Gear Types for Different Motion Systems
Select the closest structure, then define tooth data, shaft arrangement, interfaces, load, speed, lubrication and required accuracy.
Spur & Helical Gears
External gears for parallel-axis drives, from direct engagement to smoother helical motion.
Internal & Ring Gears
Compact internal-tooth and annular structures for planetary and circular assemblies.
Kegeltandwielen
Angle-drive gears for intersecting or offset shaft arrangements.
Wormwieloverbrengingen
Wormwielstellen voor overbrengingen met hoge overbrengingsverhouding en schuine as.
Tandstangen
Linear tooth elements paired with pinions for controlled travel.
Gear Shafts & Compound Gears
Integrated teeth, shafts, hubs and multiple stages with controlled datum relationships.
Materiaalkeuze
Gear Materials, Grades and Treatments
Choose metal or engineering plastic first, then compare grades by tooth strength, fatigue life, wear, corrosion, lubrication and dimensional stability.
Alloy & Case-Hardening Steel
High tooth strength, fatigue resistance and heat-treatment flexibility for load-bearing gears.
- Veelvoorkomende cijfers
- 1045, 4140, 4340, 8620 and compatible gear steels.
- Serviceomgeving
- General transmission, gear shafts and high-load drives.
- Behandeling en afwerking
- Carburizing, nitriding, induction or through hardening; black oxide or phosphate when specified.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
Roestvrij staal
Corrosion resistance and cleanliness for moisture, washdown and chemical exposure.
- Veelvoorkomende cijfers
- 303, 304, 316L, 420 and 17-4 PH.
- Serviceomgeving
- Food, medical, marine, chemical and clean-service equipment.
- Behandeling en afwerking
- Passivation or electropolishing; hardening only for compatible grades.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
Brons
Anti-galling and sliding-wear behavior for worm wheels and friction-sensitive pairs.
- Veelvoorkomende cijfers
- C93200, C95400, C95500 and project-specific bronzes.
- Serviceomgeving
- Worm drives, lubricated motion and heavy-duty sliding contact.
- Behandeling en afwerking
- Machined finish or controlled polishing; heat treatment depends on alloy condition.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
Aluminium
Low rotating mass and corrosion resistance for moderate-load lightweight mechanisms.
- Veelvoorkomende cijfers
- 6061-T6, 6082-T6, 7075-T6 and MIC-6 where appropriate.
- Serviceomgeving
- Robotics, instruments and low-inertia drive systems.
- Behandeling en afwerking
- Anodizing or hard anodizing when compatible with fit and wear requirements.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
Titanium & Nickel Alloys
High specific strength, corrosion resistance or elevated-temperature capability for specialized gears.
- Veelvoorkomende cijfers
- Ti-6Al-4V and drawing-specified titanium or nickel-alloy grades.
- Serviceomgeving
- Aerospace, chemical, high-temperature and regulated equipment.
- Behandeling en afwerking
- Alloy-compatible treatments confirmed from the drawing and governing specification.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
POM / Acetaal
Low friction, stable dimensions and quiet motion for light-to-moderate loads.
- Veelvoorkomende cijfers
- POM-C, POM-H and filled acetal grades.
- Serviceomgeving
- Instruments, automation, small drives and low-noise mechanisms.
- Behandeling en afwerking
- As-machined with controlled deburring; avoid excessive post-machining heat.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
PA / Nylon
Toughness, wear resistance and impact tolerance with moisture-aware clearance design.
- Veelvoorkomende cijfers
- PA6, PA66, PA12, MC Nylon and reinforced grades.
- Serviceomgeving
- Conveyors, machinery, moderate-load gears and impact-prone mechanisms.
- Behandeling en afwerking
- As-machined or lightly polished; moisture conditioning only when specified.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
PEEK
High-temperature strength and chemical resistance for demanding precision mechanisms.
- Veelvoorkomende cijfers
- Virgin, glass-filled, carbon-filled and bearing grades.
- Serviceomgeving
- Apparatuur voor de lucht- en ruimtevaart, de medische sector, de halfgeleiderindustrie en de chemische industrie.
- Behandeling en afwerking
- As-machined; annealing may be specified for dimensional stability.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
UHMW-PE / PTFE Compounds
Low-friction polymers selected for wear, chemical and electrical requirements.
- Veelvoorkomende cijfers
- UHMW-PE and application-specific filled PTFE compounds.
- Serviceomgeving
- Low-load guides, sprockets and chemically exposed or electrically insulating mechanisms.
- Behandeling en afwerking
- As-machined or lightly deburred; resin-compatible conditioning only when specified.
- Selectiecriteria
- Load, speed, lubrication, temperature, corrosion and dimensional stability.
De uiteindelijke kwaliteit, de toestand, de hardheid en de behandeling worden getoetst aan de tekening en de operationele eisen.
Op tekeningen gebaseerde mogelijkheden
Custom Gear Manufacturing Parameters
These ranges support quotation review and are not guaranteed limits for every geometry and material combination.
| Capaciteit | Review Range | Key Requirement |
|---|---|---|
| Module | M0,3–M12 | Tooth form and inspection method |
| Gear diameter | Ø8–Ø1.200 mm | Structure, blank and machine access |
| Tooth count | 6–500 tanden | Module, profile and diameter |
| Face width | 2–300 mm | Tool access and rigidity |
| Pressure angle | 14,5° · 20° · 25° | Drawing and mating gear |
| Helix angle | Tot 45° | Hand, lead and inspection |
| Target accuracy | ISO 1328 Grade 5–10 | Confirmed from geometry and verification method |
Final capability depends on gear type, size, material condition, heat treatment, tooth form, datum scheme and inspection method.
Productie en keuring
From Gear Drawing Review to Protected Delivery
The production route is planned around datum control, tooth generation, treatment timing and inspection checkpoints.
Confirm tooth data, material, treatment, quantity and records.
Set datums, workholding, allowances and process sequence.
Machine blanks, bores, hubs, shafts and tooth geometry.
Verify specified features and protect teeth for shipment.
Machined Gear Projects
Custom CNC-Machined Gear Parts
Prototype and production gears in different structures, materials and finishes.
Quotation Preparation
Prepare a Complete Gear Drawing Package
Clear technical inputs reduce assumptions and help confirm the process, inspection scope and delivery plan.
Custom Gear FAQ