Custom composite parts
Custom Carbon Fiber CNC Machining
Weldo machines drawing-based carbon fiber parts for lightweight, stiff assemblies—from functional prototypes to repeat production.
素材の選択
Which Carbon Fiber Materials Can Be Machined?
The laminate, resin and layup determine tool choice, edge quality and dimensional stability. We review your supplied material or specified blank before machining.
Cured CFRP Laminates
Flat plates for brackets, covers and structural panels. Fiber direction and ply stack guide feature placement and edge finishing.
Composite Tubes & Profiles
Cut-to-length and machined openings for lightweight frames, shafts and equipment structures, subject to blank geometry.
Carbon-Filled Plastics
Fiber-filled PEEK, nylon and similar polymers use different machining and inspection plans from laminated CFRP.
Specify the material grade, laminate thickness and fiber layup on the RFQ so the machining plan matches the actual composite.
Machining capability
Built Around Clean Edges and Reliable Fits
We select workholding, cutters and cutting conditions to limit delamination, burrs and heat buildup. Dust extraction and cleaning are planned with the machining sequence.
Profile Milling & Routing
Controlled outlines, slots, pockets and mounting features from cured composite blanks.
Precision Drilling
Supported entry and exit surfaces help protect the laminate around fastener holes.
二次事業
Deburring, edge sealing, insert installation and assembly preparation as specified.
Tolerance & verification
How Are Carbon Fiber Parts Measured?
Inspection follows the drawing’s datums and critical-to-function dimensions. Final tolerances are confirmed against laminate construction, part size and feature location before production.
| 特徴 | Quotation-stage reference | Inspection focus |
|---|---|---|
| General outline | ±0.20 mm | Profile and edge condition |
| 取り付け穴 | ±0.10 mm | Diameter and center position |
| Critical fit features | ±0.05 mm after DFM review | Drawing-defined datum and fit |
These are planning references, not universal guarantees. The approved drawing and inspection plan set the acceptance limits.
代表的なアプリケーション
Custom Carbon Fiber Parts by Application
Part design should account for fiber direction, mounting loads and how the composite meets metal hardware.
UAV & Aerospace
Lightweight mounting plates, sensor brackets and structural panels.
ロボット工学
End-effector plates, arm parts and motion-system brackets.
Motorsport & Sports
Instrument panels, mounting tabs and weight-sensitive fixtures.
検査機器
Stiff sensor supports, vision mounts and portable frames.
Finishing & project support
From Machined Edges to Assembly-Ready Parts
Finishing choices protect exposed fibers and support the required appearance or assembly method.
Edge Finishing
Deburring and edge sealing reduce exposed fibers at trimmed profiles and drilled holes.
表面の外観
Clear coating, paint or a specified protective finish can be evaluated against the laminate and service environment.
Hardware & Assembly
Bonded inserts and fastener interfaces are planned around the load path and drawing requirements.
Request a Carbon Fiber Part Quote
Send your drawing, laminate specification, quantity and critical dimensions for a machining review.