PE CNC Machining Services | Weldo
Пятиосевая деталь из полиэтилена, изготовленная на станке с ЧПУ

PE CNC Machining Services

Custom polyethylene guides, bushings, plates, and fluid-handling parts made to drawing. Weldo machines HDPE, UHMW-PE, and other specified grades with attention to flexible stock, heat, edge quality, and dimensional stability.

  • HDPE & UHMW-PE
  • Milling & Turning
  • От прототипа до производства
Upload Your PE Part Drawing

Марки полиэтилена для деталей, подвергающихся механической обработке

Choose by stiffness, wear, impact, chemical exposure, and the documentation required for the intended use.

Плита из полиэтилена высокой плотности (HDPE) для обработки на станках с ЧПУ

HDPE — General-Purpose Machined Parts

A practical choice for chemical-resistant plates, supports, housings, and fluid-handling parts. HDPE offers greater stiffness than lower-density PE grades while remaining relatively flexible compared with many engineering plastics.

View material details
Типичные компоненты
Mounting plates, valve bodies, protective housings, spacers, and equipment supports.
Machining considerations
Use sharp tools, broad support, and balanced material removal. Large plates and thin walls need particular attention to flatness and spring-back.
Selection priorities
Check the exact grade against sustained load, temperature, fluid exposure, and any food-contact or other documentation requirements.

PE offers low moisture uptake and useful chemical resistance, but load, creep, thermal expansion, and the exact service conditions still govern part performance.

HDPE and UHMW-PE Property References

Indicative ranges for selected unfilled stock shapes. Resin grade, stock processing, conditioning, and test method affect the values.

НедвижимостьПНДUHMW-PE
Плотность0,95–0,96 г/см³0,93–0,96 г/см³
Tensile Strength at Yield23–26 МПа17–22 МПа
Модуль упругости при растяжении950–1 400 МПа470–700 МПа
Удлинение при разрыве100–600%+200–350%+
ТвердостьШор D, стр. 64–67Шор D, стр. 62–66
Поглощение водыVery low; test-dependentVery low; test-dependent

Use the exact supplier datasheet for final design. Upper service references around 80°C apply only to suitable grades under specified conditions; loaded parts may require a lower limit. Confirm low-temperature duty, water-absorption test conditions, and creep behavior separately.

Machining Controls for Clean, Stable PE Parts

Tooling and support are matched to the material’s softness, flexibility, and thermal movement.

Острые режущие инструменты

Suitable geometry and sharp edges limit rubbing, tearing, and soft burrs.

Supported Workholding

Broad support and controlled pressure reduce clamping distortion and spring-back.

Управление нагревом и стружкой

Limit heat buildup and clear stringy chips before they wrap or mark the surface.

Контролируемая отделка

Finish critical features with a suitable allowance, deburr carefully, and inspect stabilized parts.

Drawing-Based PE Machining Capabilities

Reference ranges for quotation. The part, material, equipment, support, and inspection plan are reviewed together.

Machining Reference Ranges

Рабочая зона фрезерного станка с ЧПУ5 × 5 × 5 to 3000 × 1600 × 1000 mmStock size, machine access, rigidity, and fixturing require review.
Область обработки при токарной обработке с ЧПУØ2 × 2 to Ø200 × 1000 mmConfirm diameter, length, support, and wall thickness together.
Dimensional referenceGeneral ±0.05 mmSelected stable features may be reviewed down to ±0.02 mm.
Wall-thickness referenceОт 1,5 ммHeight, span, support, handling, and load govern suitability.
Drilled-hole referenceОт Ø0,5 ммDepth, location, tool access, and inspection must be confirmed.
Количество продукции1-piece prototypes to 500+ partsThe production route follows the drawing and order requirements.
ПроверкаContact and optical methodsCMM, height gauge, micrometer, caliper, or optical projector as appropriate.

Maximum envelope, smallest hole, thin-wall reference, and closest tolerance are assessed separately. They should not be assumed achievable together or on every PE grade.

PE Parts for Wear, Motion, and Chemical Service

Match the geometry and grade to the assembly’s load, temperature, mating surfaces, and fluid exposure.

Guide Rails & Wear Strips

Sliding contact surfaces for conveyor, automation, and material-handling equipment.

Bushings & Sleeves

Replaceable sliding or locating parts, with clearances matched to load and temperature.

Rollers & Pulleys

Lightweight rotating components for compatible conveying and handling applications.

Gaskets & Isolation Parts

Simple sealing, cushioning, or isolation components reviewed for compression and creep.

Valve & Mixer Components

Bodies, seats, paddles, and supports for fluids compatible with the specified grade.

Custom Plates & Housings

Machined holes, pockets, slots, and mounting features for industrial assemblies.

Варианты отделки и сборки из полиэтилена

Select only the operations that serve the part’s edge quality, surface function, appearance, or assembly requirements.

Обработанный

The usual finish for functional PE parts. Specify the important faces, edge breaks, and acceptance requirements.

Deburring & Edge Finishing

Remove loose material and sharp edges while protecting holes, fits, thin sections, and functional dimensions.

Selected Surface Smoothing

Reduce tool marks where practical. A smoother appearance does not by itself guarantee lower friction or a mirror finish.

Текстурирование / Освещение

Consider only where useful and validated. Soft PE can deform, roughen, or retain media under aggressive treatment.

Активация поверхности

Flame, corona, or plasma processes may support printing or bonding. Qualify the treatment, timing, and adhesive or coating system.

Welding & Assembly

Suitable HDPE grades may be welded using a qualified process. UHMW-PE needs specialist joining review; define inserts and hardware early.

PE Machining Questions

Practical guidance for material choice, machining, joining, and documentation.

Is PE the same as HDPE?

PE is the polyethylene family. HDPE, MDPE, and UHMW-PE are different members with different stiffness, molecular structure, stock forms, and application strengths. Specify the actual grade for production.

Что выбрать: HDPE или UHMW-PE?

HDPE is often considered for general-purpose plates, supports, and chemical-service components. UHMW-PE is commonly considered where abrasion, impact, and sliding behavior dominate. Load, temperature, and dimensional requirements still need review.

Can PE hold tight machining tolerances?

The page’s general reference is ±0.05 mm, with selected stable features reviewed down to ±0.02 mm. These values depend on feature size, grade, rigidity, stock condition, temperature, and the agreed inspection method.

How are burrs and deformation controlled?

Sharp tooling, suitable support, controlled clamping force, chip evacuation, and a finishing strategy matched to the geometry help reduce distortion and edge damage. Critical dimensions are checked after stabilization.

Can PE be painted, bonded, or welded?

Painting and bonding usually require compatible surface preparation and application testing because PE has low surface energy. Welding depends on the grade and joint design; conventional HDPE welding methods should not be assumed suitable for UHMW-PE.

Can you machine food-contact or medical PE components?

A suitable documented grade can be reviewed for the intended application. Acceptance depends on the exact resin, additives, color, traceability, and any component-level requirements. A general PE designation does not establish compliance.